15KV/27KV/38KV AUTO Circuit Recloser - Reliable China Suppliers and Factory Solutions for Efficient Power Management
General
Farady Electric strives to bring our customers the latest technology and competitive pricing and best service for pole mounted Auto circuit recloser.
The FAR series Auto circuit recloser can use on overhead distribution lines as well as distribution substation applications for all voltage classes 11kV up to 38kV at 50/60HZ power system. And its rated current can reach 1600A.
Service Condition
- Air temperature: Maximum temperature: +85℃; Minimum temperature: -45℃.
- Humidity: Monthly average humidity 95%; Daily average humidity 90%.
- Altitude: Maximum installation altitude: 2500m or higher.
- Environment: Ambient air not apparently polluted by corrosive and flammable gas, vapor, etc.
- Stability: No frequent violent shake.
Product Structure
| 1. ON/OFF Indicator | 2. Emergency Close | 3. Counter |
| 4. Manual OFF | 5. Earthing | 6. Secondary Socket |
| 7. Magnet Mechanism |
- High quality Solid Epoxy resin material
- Fully comply with ANSI std
- Guarantee 30,000 times operation. Environment friendly, Oil / SF6 Gas free
- Suitable for both Pole mounted or Substation available
- Reliable and Enhanced Life Expectancy
- Ambient temp: -40℃~80℃
| 1. Rogowski coil | 2. Voltage Sensor | 3. Vacuum Interrupter |
| 4. CT | 5. Conductor | 6. Push Rod |
| 7. Push Reed |
- High quality Vacuum Interrupter
- Voltage sensor Integrated
- CT Integrated
- Reliable Push rod
- Minimized moving components
- Maintenance free design
Controller
Voltlogic-351 series recloser controller is a medium voltage overhead line grid monitoring unit. It can be combined with vacuum circuit breakers for automatic reclose, measurement monitoring, fault analysis, and event records, providing safety for cutting line faults and automatic recovery.
Supports: Wireless (GSM/GPRS/CDMA), Ethernet mode, WIFI, optical fiber, RS232/485, RJ45 and more.
| Protection functions | ANSI code | Name in Device |
|---|---|---|
| Phase overcurrent | 50P | P.OC |
| Overload | 49 | Overload |
| Phase Time-Overcurrent | 51P | P.Curve |
| Ground Overcurrent | 50G/N | E.F |
| Recloser | 79 | Reclose |
| Phase overcurrent cold load pick-up | CLPU 50 | Cold Load |
| Switch-Onto-Fault | - | SOTF |
| Undervoltage | 27 | Under volt |
| Overvoltage | 50P | P.OC |
Phase current (IA, IB, IC RMS), Voltage (Uab, Ubc, Uca, U0), Active/Reactive power, Frequency. Circuit breaker control (94) and Latching (86).
- Complete protection configuration with flexible switching.
- 6 channels signal input; 4 channels current/voltage measure.
- Large capacity flash memory (100+ historical events).
- Self-inspection function for high reliability.
User Interface
The operator interface provides a user-friendly method for controlling, viewing menus, and retrieving data. Four navigation buttons are provided.
Projects & Installation
