15KV/27KV/38KV Auto Circuit Recloser - Reliable China Suppliers & Factory for Outdoor/Indoor Applications
General
Farady Electric strives to bring our customers the latest technology and competitive pricing and best service for pole mounted Auto circuit recloser.
The FAR series Auto circuit recloser can use on overhead distribution lines as well as distribution substation applications for all voltage classes 11kV up to 38kV at 50/60HZ power system. And its rated current can reach 1600A.
Service Condition
Product Structure
| 1 | ON/OFF Indicator | 2 | Emergency Close | 3 | Counter |
| 4 | Manual OFF | 5 | Earthing | 6 | Secondary Socket |
| 7 | Magnet Mechanism |
| 1 | Rogowski coil | 2 | Voltage Sensor | 3 | Vacuum Interrupter |
| 4 | CT | 5 | Conductor | 6 | Push Rod |
| 7 | Push Reed |
Controller
1. Voltlogic-351 series recloser controller is medium voltage overhead line grid monitoring unit. It can combined with vacuum circuit breaker for achieve of automatic reclose, measure monitoring, fault analysis and event records.
2. The controller is suitable for up to 38kV outdoor switchgear using, include: vacuum circuit breakers, oil circuit breakers and gas circuit breakers.
3. The controller column switch intelligent controller supports: Wireless (GSM/GPRS/CDMA), Ethernet mode, WIFI, optical fiber, power line carrier, RS232/485, RJ45 and other forms of communication.
| Protection functions | ANSI code | Name in Device |
| Phase overcurrent | 50P | P.OC |
| Overload | 49 | Overload |
| Phase Time-Overcurrent | 51P | P.Curve |
| Ground Overcurrent | 50G/N | E.F |
| Recloser | 79 | Reclose |
| Phase overcurrent cold load pick-up | CLPU 50 | Cold Load |
| Switch-Onto-Fault | SOTF | |
| Undervoltage | 27 | Under volt |
| Overvoltage | 50P | P.OC |
Phase current IA, IB, IC RMS, Zero Sequency; Voltage Uab, Ubc, Uca, U0; Active power, reactive power and power factor; Frequency.
1.4 Control and monitoring| Circuit breaker control | 94 |
| Latching /acknowledgement | 86 |
RS485, RS232 port and Ethernet. Protocols: IEC60870-5-101, IEC60870-5-104, IEC61850 or Modbus RTU, DNP3.0.
User Interface
The operator interface is designed to provide a user friendly method of controlling to user, viewing menus, entering settings and retrieving data from the relay.
Projects
Installation



