China SC(B)10 Series Three Phase Resin-Cast Dry-Type Distribution Transformer Suppliers from Reliable Factory
SC(B)10 series three phase resin-cast dry-type distribution transformer are in conformity with standard of IEC60076, with features of low loss, compact and light weight, low noise level, clamp-proof, anti-fouling, high mechanical strength, flame resisting.
General
Farady Electric manufacture a complete range of three phase distribution transformers, including oil-immersed type & cast resin dry-type transformer, we always designed with increased margins of safety and reliability, and meet the following standard:
IEC60076
IEEE Std
GB1094
Application
Strong overload ability and low partial discharge quality, they are application to power transmission and distribution system, hotel, restaurant, commercial building, stadiums, chemical plants, stations, airports, offshore drilling platforms, especially to heavy load centers and places with special fire protection requirements.
Mainly rating, types & capacity
Phase & Windings
Three phase, two windings or three windings
Voltage Control
On-load or no-load voltage tapping changer
Cooling & Capacity
Natural cooling or force air, 10-2500kVA
Service condition
a)
Suitable for indoor or outdoor application
b)
Air temperature: Maximum temperature: +40℃; Minimum temperature: -30℃
c)
Humidity: Monthly average humidity 95%; Daily average humidity 90%.
d)
Altitude above sea level: Maximum installation altitude: 2000m.
e)
Max wind speed: 35M/s
f)
Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
g)
No frequent violent shake
Note: * Beyond those services condition should enquiry to manufacturer technical dept during order
High reliability feature
Flame resistant
Explosion proof
Low temperature rise
Low loss & low noise
No environmental contamination
Frequently Asked Questions (FAQ)
Q: Which standards do the SC(B)10 series transformers comply with?
A: The SC(B)10 series three-phase resin-cast dry-type distribution transformers comply with the IEC60076, IEEE Std, and GB1094 standards.
Q: What are the primary applications for these dry-type transformers?
A: They are widely applied in power transmission and distribution systems, hotels, restaurants, commercial buildings, stadiums, chemical plants, stations, airports, offshore drilling platforms, and especially in heavy load centers or places with special fire protection requirements.
Q: What capacity range is available for the SC(B)10 series?
A: Farady Electric offers these transformers in capacities ranging from 10kVA to 2500kVA.
Q: What are the standard environmental service conditions for installation?
A: They are suitable for indoor or outdoor applications with air temperatures between -30℃ and +40℃, a maximum installation altitude of 2000m, maximum wind speeds of 35m/s, monthly average humidity of 95% (daily average 90%), and in ambient air free from corrosive or flammable gas.
Q: What key reliability features do these dry-type distribution transformers offer?
A: Key features include being flame resistant and explosion-proof, having a low temperature rise, low loss, low noise, and causing no environmental contamination.
Q: Can these transformers be customized for conditions outside the standard service limits?
A: Yes, if your operating conditions exceed the standard service limits, you can make inquiries with the manufacturer's technical department during the ordering process.