China Suppliers FCS Series 15/27/38kV Capacitor Switch - Single/Three Phase Factory Solutions
The Farady's new generation FCS capacitor switch is a special electrical field design on vacuum interrupter and switch body insulation for switching capacitive current. Integrated with single or three phase pole mounted capacitor bank to be reactive power compensation.
General
✓
With long mechanical and electrical life design can provides an operational life of over 100,000 maintenance-free operations.
✓
Using the FCS will result in substantial savings from reduced maintenance and maximized bank uptime and will also improve Power Quality.
✓
The FCS all comply with relative standard ANSI C37.66/IEC622771.
Service Condition
●Ambient temperature: -40℃~+85℃, day temperature difference:25℃;
●Altitude: Below 2000m(special condition pls contact Farady Technical);
●Wind speed no exceeds 35m/s;
●No normally intensity vibration;
●No intensity erosion gas, medium place (for example acid, alkali, smother eg.);
●Pollution class: IV class;
●Charge temperature -40℃~+85℃.
Feature
With optional choice by Normal type and magnetic actuator mechanism.
 |
This advanced design monostable type magnetic actuator. With mechanical life 100,000 times. Intelligence capacitor switch controller. |
| Magnetic actuator operate mechanism | Spring mechanism available |
 |
Manual trip/Close |
| Can be manual trip by hook sticker. | Open/Close indicator: Visible from ground |
With optional classes for rated current range:
For 15/27/38kV, with 630A, Max 50kA making capacity. Normal current 1250A is optional.
For 15/27/38kV, with 630A, Max 50kA making capacity. Normal current 1250A is optional.
With optional communication protocols & l/O port for user choice:
• RS-232 and RS-485 ports supporting.
• Modbus communication protocol is optional(*need special order)
• IEC 60870-5-101 communication protocol support.
• Communication through GPRS(Or GSM) modem with English(*special order)
• RS-232 and RS-485 ports supporting.
• Modbus communication protocol is optional(*need special order)
• IEC 60870-5-101 communication protocol support.
• Communication through GPRS(Or GSM) modem with English(*special order)
Note:(*)mean should customized by manufacturer if needed.
Accessories of FCS
Upper terminal Insulator cover 3 pcs/set
Lower terminal Insulator cover 3 pcs/set
Lower expanding bushing 3 pcs/set
Upper terminal 3 pcs/set
Lower terminal 3 pcs/set
Note: Standard made of T2 copper material, for 630A rated current using. With expanding range.
Main new advantages of FCS capacitor switch
Farady Supply special design manual closing device technology with own patent, It applied for normal and abnormal situation closing. Its closing speed(time) comply with IEC62271-100. This function can offset from magnetic actuator fault.
• Primary incomer terminal (directly connect to interrupter reduce power lost)
• Vacuum interrupter (APG technology with external silicone rubber mold pressure covering)
• Outlet bushing (external modular design easy for quality control and maintenance)
• High-performance magnetic actuator (ANSOFT design), demagnetization rate
• Vacuum interrupter (APG technology with external silicone rubber mold pressure covering)
• Outlet bushing (external modular design easy for quality control and maintenance)
• High-performance magnetic actuator (ANSOFT design), demagnetization rate
Note: Farady supply special patent modular design mono-stable type magnetic actuator with two coils controlling.
Creepage Distances of FCS capacitor switch
| Description | 15kV BIL 90kV | 27kV BIL 150kV | 38kV BIL 170kV | 38kV BIL 200kV |
|---|---|---|---|---|
| T to T* | 470 | 840 | 1140 | 1250 |
| T to G/E* | 500 | 1020 | 1200 | 1300 |
T to T* : Terminal to terminal creepage | T to G/E* : Terminal to ground/earth creepage
This figure does not include lower expanding bushing.
This figure does not include lower expanding bushing.
Outline & Sizes for FCS
Capacitor switch controller features
 |
Components Specification: 1. ON(Red) & OFF(Green) signal lights. 2. Alarm/Fault light (Yellow). 3. Open(Green) & Close(Red) push buttons. 4. Batteries: 2pcs 12Vdc, 7AH/pcs. 5. Capacitor: 1pcs 250Vdc, 22000uF. 6. MCB: 2poles & 1poles, AC220Vac, 16A. 7. Power inverter: 24Vdc to 250Vdc. 8. Intelligence control device. 9. Rotate switch: 220Vac for remote/local control. 10. Auxiliary switch contacts: 220Vac, 10A. |
Note: (*) Standard equipped with only terminal or ON/OFF controller, special design must be customized.
Outline & Sizes for FCS capacitor switch controller
Q1: What is the expected mechanical life of the FCS capacitor switch?
The FCS capacitor switch is designed for a long mechanical life of over 100,000 maintenance-free operations.
Q2: Which international standards does the FCS series comply with?
All FCS series switches comply with ANSI C37.66 and IEC 62271 standards.
Q3: What are the available voltage and current ratings?
The switch is available for 15kV, 27kV, and 38kV systems, with a standard rated current of 630A and an optional 1250A version.
Q4: Can the switch operate in extreme weather conditions?
Yes, it is designed to operate in ambient temperatures ranging from -40℃ to +85℃ and is suitable for pollution class IV environments.
Q5: What communication protocols are supported by the intelligence controller?
The controller supports RS-232, RS-485, IEC 60870-5-101, and optional Modbus or GPRS/GSM communication.
Q6: Does the switch include a manual operation feature?
Yes, it features a patented manual closing device for both normal and abnormal situations, as well as a manual trip capability via a hook sticker.