Three Phase Resin-Cast Dry-Type Distribution Transformer - China Supplier & Factory, Customized Options Available
SC(B)10 series three phase resin-cast dry-type distribution transformer are in conformity with standard of IEC60076, with features of low loss, compact and light weight, low noise level, clamp-proof, anti-fouling, high mechanical strength, and flame resisting.
General
Farady Electric manufacture a complete range of three phase distribution transformers, including oil-immersed type & cast resin dry-type transformer. We always design with increased margins of safety and reliability, meeting the following standards:
IEC60076
IEEE Std
GB1094
Application
Strong overload ability and low partial discharge quality. They are applicable to power transmission and distribution systems, hotels, restaurants, commercial buildings, stadiums, chemical plants, stations, airports, offshore drilling platforms, especially to heavy load centers and places with special fire protection requirements.
Mainly Rating, Types & Capacity
Three phase
Two windings or three windings
On-load or no-load voltage tapping changer
Natural cooling or force air
Capacity: 10-2500kVA
Service Condition
Suitable for indoor or outdoor application
Air temperature: Max +40℃; Min -30℃
Humidity: Monthly average 95%; Daily average 90%
Altitude: Maximum installation altitude 2000m
Max wind speed: 35M/s
Ambient air not apparently polluted by corrosive/flammable gas or vapor
No frequent violent shake
Note: * Beyond those services condition should enquiry to manufacturer technical dept during order
High Reliability Feature
Flame resistant
Explosion proof
Low temperature rise
Low loss & low noise
No environmental contamination
Frequently Asked Questions
What standards do SC(B)10 series transformers comply with?
They are in full conformity with IEC60076, IEEE Std, and GB1094 standards.
What is the capacity range for these dry-type transformers?
The SC(B)10 series covers a capacity range from 10kVA up to 2500kVA.
Can these transformers be installed in high-altitude areas?
Yes, they are suitable for installations up to a maximum altitude of 2000 meters above sea level.
Are these transformers suitable for environments with fire safety requirements?
Absolutely. Due to their resin-cast design, they are flame resistant and explosion proof, making them ideal for places with strict fire protection requirements.
What are the cooling options available?
The transformers can be configured with either natural cooling (AN) or forced air cooling (AF) depending on your requirements.
What are the operating temperature limits?
They are designed to operate in ambient temperatures ranging from a minimum of -30℃ to a maximum of +40℃.